2016年9月29日星期四

Preparation of Environmentally Friendly Square Brick by Industrial Waste

China is a big country of coal production and consumption, the coal-fired fly ash and a large number of sulfur dioxide as a malignant pollutant, the accumulation of these industrial waste squeeze the land, affecting the local air dust content. The application of these wastes in environmental protection brick production, not only can make rational use of pollutants, but also effectively improve the ecological cycle of the road function. At present, the research and application of environmental protection bricks at home and abroad, although wide, but the market is still a single type of environmentally friendly bricks, and truly meet the environmental standards of environmental protection brick is also very few, but in raw materials to achieve environmental protection and can not be completely resolved Environment and the use of the process of problems. Environmental protection and cheap raw materials, brick structure can play a role in improving the ecological environment of green bricks has become an important international research and production of environmentally friendly bricks target. Environmental protection bricks in the world for about 70 years of history.

tile press machine

The former Soviet Union set the standard when the Soviet Union 379-53 [1], already on the physical and mechanical properties of fly ash bricks and the use of such a clearly defined. In 1958 China has successfully developed autoclaved and non-autoclaved fly ash slag brick, in 1965 began to produce fly ash fired brick [2], the current domestic production of fly ash brick mainly autoclaved fly ash brick and sintering Fly ash brick, the product with large amount of ash, can save a lot of clay, and performance and clay brick or less. Due to the short history of domestic desulfurization gypsum [3], comprehensive utilization is also just started, at this stage of industrial waste such as gypsum and other industrial waste in only a few areas have been applied to the research and application of environmentally friendly bricks technology is not mature, and not yet The formation of industrialization, industrialization scale. With the rapid development of the social economy and industry, the industrial waste has increased sharply, which has brought great pressure to the urban environment and restricted the sustainable development of economy and industry. Desulphurization gypsum and fly ash are also the main solid waste pollution sources. Therefore, if the effective use of desulfurized gypsum and fly ash pavement made of environmentally friendly bricks [4], not only in response to the national sustainable development strategies to reduce the environmental pollution of these wastes, and can effectively avoid the "secondary pollution" To achieve national waste into the advocate. At the same time, the green brick made from these raw materials can greatly reduce the cost while achieving the product standard.

You can also visit www.newtilemachine.com for more product information

The artistic sense of fair - faced concrete

From Le Corbusier (Le Corbusier) with raw concrete exposed to show the rough beauty, to the water concrete poet Ando Tadao will be the original heavy, rough surface texture of the concrete, to create a delicate and delicate texture, showing a dense, almost Homogeneous texture, so that people gradually get rid of the concrete cold, blunt, non-human criticism, and cause more and more interest in the architect. With stone, wood and other natural materials from natural, like the imprint of time in the concrete also left a deep and shallow traces of the years. Fresh concrete surface such as skin-like breathing holes, bubbles, creating a sense of life growth. As a result, it has been found that more and more concrete decorative elements in the application of the design of the interior design Yang Yi, Dai Xiangdong, Huang Yanli, Zhang Yanhong Abstract: Since the 20th century, since the 1920s, concrete building has caused people's Attention, and there are many outstanding works of architecture vividly in front of the world. Clear water concrete has been the architects to play with the taste, but its application in interior design has not been the attention it deserves. From the point of construction of the fair-faced concrete in the building, the key points of design of the fair-faced concrete in the interior design are discussed from the aspects of space, function, texture and related technology, according to the relevant requirements and characteristics of the interior design and construction. The construction procedure and construction requirements of cast-in-situ concrete and precast concrete in the interior decoration are expounded respectively, and several follow-up protective measures should be paid attention to after the completion of the construction of the fair-faced concrete. When I look at the concrete, it is also looking at me. Even today, fair-faced concrete is still a challenge to many architects. China's water concrete technology late, large-scale construction of concrete buildings are rare, Lenovo Group R & D base is "China's first large concrete buildings," Xie Qiang, said his former designer is in the book, only In-person practice, only really appreciate the kind of water from the inside out of the concrete exudes charm.

Its general feeling of skin people have the desire to touch, even in the subtle feel the breath of its pores, it is full of spiritual affinity is not comparable to any other building materials. At the same time, architects and designers are experimenting with the performance of fair-faced concrete, such as Dafna Arnon, a woman architect who believes that architectural properties derive from space, light, indoor and outdoor connections, and details. Design, some small elements such as furniture, works of art with concrete, color, wood, light, landscape penetration to every corner of the house and change with the seasons. She believes that the building is not only its appearance, but also the building itself. Residential facades are both unique and spectacular, and while bare concrete gives a sense of alienation, she manages to create a warm, private atmosphere in her home. However, this exposure is still derived from the building itself, while the interior design is the second time within the building modification and molding, so the concrete in the interior design as a material and element applications, from design to construction there are Some differences. Material is the continuous discovery and use of natural objects, and become the basis for the design and production of various objects. The author of the traditional materials in the application of concrete in the interior has been of great interest. The author, through the practice of interior decoration design and construction case, combined with the construction of concrete in the specification requirements and acceptance criteria, from the design points, construction procedures, follow-up protection and other aspects of the concrete elements in the interior design of the application method.

You can also visit www.newtilemachine.com for more product information

2016年9月28日星期三

Application of prefabricated terrazzo and terrazzo brick

Prefabricated terrazzo is cement as binder, together with natural marble or calcite, dolomite, silica sand, glass powder and other inorganic powder, color, etc., by mixing ingredients, the use of Italian vacuum pressure technology blank, 12 straight polished Machine polishing, double-sided set thickness, four-side cutting edge made of multi-channel process to ensure product quality, product indicators are better than the national industry standards. With the advantages of comprehensive utilization of resources in environmental protection and energy saving can not be underestimated the role of the building materials is also worthy of the name of green products. Has become the preferred modern building facing materials.

In recent years, prefabricated terrazzo staircase in public buildings in the application of more and more widely. The main advantages are: First, the production factory: to ensure the quality and improve work efficiency, and conditional units can be to the professional development, to further improve the operation of technology and reduce costs. Second, on-site assembly: the construction of civilization fast, low labor intensity conditions, compared with the wet operation has obvious advantages.

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

Introduction of various floor tiles

Introduction of various floor tiles
1, square brick: the natural stone processing into small size stone products (100 * 100mm square, side 100mm or 80mm hexagon and diamond, etc.), dedicated to pavement, garden roads and other outdoor ground. Its material, variety, color, origin and stone works is basically the same plate to granite-based. In the stone square brick industry, light-colored products are mostly (called the main color products), black and red tone see less (called color products). The use of color products generally use more high-end and luxury varieties.
2, the flat tile: the product by the polishing or fire treatment, widely used in a variety of outdoor environmental ground pavement, the most commonly used places are: landscape roads, community garden pavement, leisure and entertainment, building plaza, stations, terminals, parking Field and so on. Due to the gap between the cracks construction, with good slip resistance, and easy to keep clean, this natural material to enhance the quality and taste of the environment.

3, square brick: matte paving slabs: widely used in indoor and outdoor environment, pavement and wall decoration. The best range of products are: water sports venues, bathroom environment, commercial entertainment venues, require special indoor effect of the star hotel and home and so on.

4, Maopian paving tiles: the main hand-made system, in the product surface to fight a natural cross-section, chop ax stripe surface, such as lychee surface skin surface or pineapple skin surface effect. Granite-based material. The main products are paving stone (pavement for different sections of the landscape), corner stone and other rough surface of handmade stone, the thickness of natural, return to nature, durability, and to stone, stone step for the commonly used products. Long life, is a large iconic, historic, permanent building commonly used selection.

5, machine planing striped brick: the application of outdoor stone, in order to prevent slip and increase the three-dimensional effect, there are chop ax stone, machine planing stone, fire stone and other practices, but these traditional practices can not meet the increasingly high-end decorative building needs. Striped stone with its clear and smooth lines of the characteristics of modern urban construction adds a beautiful style.
6, bluestone paving stone: gray tone, with the garden green environment in harmony. The famous Suzhou garden is all made of calcium-based gray stone garden. Currently on the market to maintain the bluestone style at the same time, combined with the needs of modern gardens, the introduction of Qingshi Qin brick brick, , Drawing treatment. Processing and other processing products, for the construction unit and design staff selection.

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

Research and development permeable terrazzo tile equipment

Permeable brick is to carry out national requirements, the sponge city construction, can largely solve the problem of urban drainage waterlogging, relative to the construction of large-scale underground pipeline network, in the floor tiles, and on the ground to work harder to play better effect. In this context, Zhengzhou City Jinshan machinery to develop a new type of urban pervious brick equipment, not only to the production of fully automatic water permeable bricks to form a production line, and the realization of pervious brick shaped, different types, different specifications of production, can achieve 300 * 300,400 * 400,500 * 500 of the various specifications of production.

Tiles

This permeable brick and ordinary bricks from the weight and size does not differ, but the overall permeability of the bricks is a small particle composition. Yan Guoqiang explained, do not underestimate these one small particles, their aggregation is also the result of hundreds of experiments before they finally gathered together, but also to build a sponge, This permeability, abrasion resistance, frost resistance are extremely high requirements. If only water seepage and can not achieve other properties, it lost its significance.
As the saying goes, a good horse with a good saddle, permeable bricks in the bottom before the laying of a pervious to the laying of mortar material, but also to water cushion, permeable road along the stone, “Yan Guoqiang said that only such a supporting the whole to the whole To play in the dry and dry conditions to release the water storage and use, so that the migration of water in the city more “natural”, not before the sewer and other “gray facilities.” It is understood that the State Council issued in 2015 “The guidance on advancing the sponge city construction”, “permeable brick” to become the country to promote a new type of ecological building materials.Perfect pavement permeable system in sufficient rainfall to complete the road surface water excretion and retention, to the city drainage system burden; In the sun, the road surface heat efficiency increases when the distribution of water vapor, to the road cool, but also with the city’s water system connected to the final formation of a complete urban groundwater system.Then the permeable bricks and sponge city construction and what are the direct relationship? This problem, Qilu network reporter interviewed the Jinan University School of Materials Professor, PhD supervisor Wang Qi, he said, pervious brick is a sponge city construction one of the key materials, it is to ensure that all types of pedestrian roads, plazas in the national standard construction and transformation The construction of pervious brick construction can realize the goal of not waterlogging in heavy rainstorm, and give full play to the absorption, infiltration and slow release of the rainwater by squares, roads and greenbelt, water system and so on, and effectively control the rainwater runoff, Natural accumulation, natural infiltration, natural purification of urban development.It is for this reason, the state should promote the sponge city construction, restoration of urban water ecology, conservation of water resources, and enhance urban waterlogging capacity, and permeable bricks and other sponge building materials Application and health will sponge the city’s development play a strong supporting role.

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

Vibrating Screen

Vibrating Screen Introduction

The vibrating screen is a kind of sieving equipment of international advanced level, developed by our company on the basis of carrying on the advantages of traditional screens and absorbing the outstanding technology from abroad

It is widely used for grading and screening materials in the following fields: minerals, quarry, building materials, water conservancy and hydropower,transportation, chemical industry,smelting and so on.

Vibrating Screen Features and Benefits :

It features long flowing line, many screening specifications, strong violent vibration force, high screening efficiency, small vibrating noises, firm and durable construction, convenient maintenance and safe operation.

Specifications:

Metal Roof tile making Machine

Specifications

IBR roof pane roll forming making machine
customized design acceptable
fully automatic
high quality
ISO

Product Description

New Condition Roof tile making machine Technical Parameter:

No.	main parameter of Floor Use and New Condition Terrazzo tile making machine
1	Suitable to process	Color steel plate
2	Width of the plate	1000mm
3	Roller	23rollers
4	Dimensions	101.451.51m
5	Power	7.5+5.5kw
6	Thickness of the plate	0.8-1.2mm
7	Productivity	8-10m/min
8	Material of the cutting blade	Cr12
9	Diameter of the roller	Φ70mm
10	Weight	About 6.8T
11	Voltage	380V 50Hz 3phases
12	Control system	PLC control

Note:Above parameters are standard,we can design and make some change according to your

requirement.

Reference Pictures:

Working flow:

manual uncoiler-roll forming machine-computer control system-hydraulic system-forming part-cutting part-discharge table

JS-600 Single-layer terrazzo tile press

DESCRIPTION:

JS-600 terrazzo tile machine can produce larger-sized tiles, such as 400X400mm, 500X500mm and 600 X 600mm.

TECHNICAL DETAILS:

Moulding pressure: 350 Tons Power: 7.5 kW Weight: About 7 Tons

Production: 4-5 pieces/minute Common matched moulds: 400X400mm, 500X500mm and 600 X 600mm.

Necessary raw materials: cement, small granule of marble/granite/limestone/gravel, stone powder.

Optional materials: pigment and chemical element.

Usage: indoor & outdoor floor, paving tiles, garden tiles, plaza tiles,etc.

PACKAGES&DELIVERY:

Packages: Wooden boxes

Delivery time: 20 days after confirmed

Characteristic:
1. 4-column structure, human-machine interview and easy operation. PLC computer control system makes automatic operation and manual operation available.
2. Advanced pneumatic and hydraulic structure to make sure high efficiency and stable performance.
3. The end products possess higher strength, very nice edges and even surface.

You can vistwww.newtilemachine.comto choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

2016年9月27日星期二

Sell terrazzo tile machine,roof tile machine

If you or your friends want to buy terrazzo tile machines or roof tile machines, please visit www.newtilemachine.com. You can also send me mail, my mailbox is CrazyHuang93@gmail.com. For more information, please visit http://www.newtilemachine.com/news/

CW-12 Rolling Type Roof Machine

The whole production line is moved by hydraulic system. The raw mixture made of sand, cement, water or pigment is evenly mixed by mixer. Then the mixture is transferred into the feeder of the tile forming machine. Under the common conditions, the tiles are shaped by extruding head and mould. After curing, the tiles can be painted. Changed the different extruding head and mould, the machines can produce various roof tiles with varied waves.

CW-12 Rolling Type Roof Machine

CW-12 rolling type concrete roof tile production line is composed by:

1、 Elevator 　
2、 Mixer
3、 Automatic Feeder　
4、Pre-vibration Machine
5、Hydraulic Electrical Cabinets
6、Forming Main Engine

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

JS-128G Tile Press

JS-128G Tile Press

JS-128G Tile Press

Box structure, human-machine interview and easy operation. professionally producing roof tiles.
Moulding pressure: 128 Tons Power: 7.5 kW Weight: 5 Tons
Production: 6-8 pieces/minute Operator: 1 or 2 workers
Raw materials: cement, sand, small granule of marble/granite/limestone/gravel, paint .
Common products: terrazzo tiles and colored roof tiles
Brief Introduction of concrete roof tile making machine:
Roof tile making machine is new and popular producing tiles equipment in modern society. This equipment adopts advanced technology which many company have not. It has better mechanism capability and economic benefit.It is widely used in building villa and ancient architecture,etc.
1. Fast forming speed,high production. Four-Post Type Tile Making Machine features PLC automic control, man-machine interface and dependable performance.
2. After the mortar is plastically rolled,the concrete tiles thus fabricated features in perfect, various style,high density, high intensity and accurate size, so that they can meet the needs of different constructions.they are best among concrete products
3.The machine can be used for multiple purposes.by changing the moulds, the equipment can produce various styles of main tiles,ridge tiles,edge tiles and ditch tiles.Also it can produce different styles of high grade concrete floor tiles and wash tiles simultaneously.

Features of concrete roof tile machine:
1.Unique Water-proof Structure
Only the moulding tile have the valley bottom structure,which is very useful for the discharge of the rain,and can be effectively to avoided the reflux of the rain.What\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s more,the higher part of the tile\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s head can never make the reflux of the rain,even on the horizontal roofing.
2.Superhigh Strength
The tile produced by JS-400 has superhigh strength,about 1280 KN,and the overall dimension is very accurate(425mm×337mm,about 9 pcs/m²).The density is very homogeneous,the rupture strength is more than 200 KG,which can bear the constructor\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s weight easily.
3. The roof tile machine has excellent design,hydraulic pressure,button operating.
4. It adopts the original mixing together with PC, mechanical, electrical, hydraulic and gas technique.Full automatic control,the overall system is more reliable and stable.
5. Since our company was professional in producing concrete roof tile machine for many years,we have rich experience in maintain and production.
6. The roof tile making machine has high technology,high capacity,less investment and more harvest.

Features of cement roof tiles:
1. The tiles which are formed by the machine can make the rain discharged more smoothly and faster,even if it is used in a horizontal roof,there will be no rain counterflow case.
2. The tiles produced by the machine has high strength,the pressure is about 1.25 million Newton,and the overall dimension is very accurate(425*337mm).9pcs are used per square meter.The rupture strength is more than 200 kilogram,so the constructor can boldly walk on the paved roof.
3. Whether vertical paved or horizontal paved,construction is always convenient.It doesn’t need to hang battens if on the common slope roof.The tiles can be cut conveniently by cutting machine at any angle.
4. The heat insulation and frost resistance of tiles are better than other tiles.
5. Because the tile is produced by high pressure,it’s penetration resistance is very well.It is usually used in long-term rain and snow area.

Working process of concrete roof tile making machine production line:

1. At frist,the raw materials are put into the bucket elevator, then deliver to the rolling mixer,at this time,you must add some water into it.
2. After mixing, the mixture come into the dosing feeder,then,measurable mixture that one tile need will put down on the mould below through a small hole.
3. Then,a tile can be formed by high pressure,the pressure is about 125 tons. So the produced tile is very stable and dense.I think the constructor can boldly walk on the paved roof.
4. By the way,the tile need to dry out for about 10 days.Then you can paint.

Main Technical Parameter of concrete roof tile machine:

Model
JS-400
Overall Dimension
3120×1750×2650 mm
Moulding Cycle
8-10 s
Moulding Pressure
1250 KN
Weight of Main Engine
5.5 t
Equipped Capacitor
5.5 kw
Production Capacity
3800-4000 pcs/day
Tile Size
424×337 mm

Advantage of concrete roof tile making machine:
1. Our company combined with the most advanced technology development from a new generation of products. The new roof tile making machine not only improves the production capacity and making efficiency, but also expand the scope of application. After years of research, we produced a new type of roof tile making machine ahead of the same industry.
2. You can also produce terrazzo floor tiles by only changing the whole mould.It can reduce your cost. This is our advanced technology which many company haven’t. And we have produced this machine for more than 20 years,so we accumulate rich experience on production and maintainance.We can assure you that the quality is good.If you choose this machine,it will bring you more harvest.

The Consist of concrete roof tile making machine:
1.roof tile forming machine
2.bucket elevator
3.rolling mixer
4.dosing feeder
5.one tile mould

Optional accessory of concrete roof tile making machine:
1.strainer
2.filter cloth
3.mould oil
4.air compressor

2016年9月22日星期四

terrazzo tile machine, terrazzo machine, tile machine, roof tile machine

JS-128 double-layer terrazzo tile press

JS-128D tile press can produce double-layer and single-layer terrazzo tiles, especially for double-layer floor tiles.

TECHNICAL DETAILS:

Moulding pressure: 128 Tons Power: 7.5 kW Weight: 5 Tons

Production: 6-8 pieces/minute Common matched moulds: 250X250, 300X300mm

Necessary raw materials: cement, small granule of marble/granite/limestone/gravel

Optional materials: pigment, chemical element and sand.

Usage: indoor & outdoor floor, paving tiles, garden tiles, plaza tiles,etc.

Characteristic:
1. human-machine interview and easy operation. PLC computer control system makes automatic operation and manual operation available.2. Advanced pneumatic and hydraulic structure to make sure high efficiency and stable performance. It is specially for producing various double-layer tiles.3. The end products possess higher strength, very nice edges and even surface.

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

terrazzo tile machine, terrazzo machine, tile machine, roof tile machine

Detailed Product Description

National patent and excellent performance: Corse, medium and fine polish are finished at one time.

Technical Details:

Place of Origin: Zhengzhou China (Mainland)

Brand name: Golden mountain

Usage: For polishing or grinding terrazzo tiles and artificial marble tiles.

Polishing heads: 5 pieces

Production: 200-350 m²/day

Power: 33 Kw

Weight: 4.9Tons

Dimension:2700X1850mm

Processing sizes: 400, 500, 600 mm

Components:

1. main polishing machine 2. Hydraulic station 3. Electrical cabinet

Characteristic:

1. Corse, medium and fine polish can be finished at one time.

2. Only 1 operator, sample structure and easy maintenance

3. High efficiency and lower energy consumption

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

terrazzo tile machine, terrazzo machine, tile machine, roof tile machine

PW-5 Automatic Curing and Painting Production Line
1. After three-time heating-curing and two-time painting, the surface of the dry concrete tile has been covered by high-grade coating.
2. During the whole course of curing and painting, the whole production line is automatically operated. Moreover, paint-supplied device adopts a high-pressure airless spraying system. 3. Under the 80 kg/m² pressure, the paint can be totally atomized and its utilization ratio ... is about 95%. 4. According to the different situation and demand of customers, the pw-5 equipment can chose fuel oil or electricity-heating tubes as the heating device.
5. This equipment can spray not only oil-based paint but also water-based paint. Adjusted control parameters, it also can be used in the plate products. Main Technical Parameters
Specification: Pw-5
Production Capacity: 16000-120000pcs/8Hours
Width of Transmitting: 1450mm
Height: 750mm
No of List : 5 lists
Kinds of Painting: Oil/Water
Power :15kw
Weight: App 12 tons
Fuel: 20~30L/Hour
Compressed Air : 2800L/Minute
Dimension : 21000×2800×2800mm

You can vist www.newtilemachine.com to choose a lot of machine what you want or send e-mail to CrazyHuang93@gmail.com to contact us.

订阅：博文 (Atom)